
Oxygen Plant Technician by Newmont Mining Corporation
- Accra
- Permanent
- Full-time
- To safely operate the site oxygen plant in accordance with OEM guidance and specifications to deliver oxygen to the Carbon-In-Leach (CIL) circuit to improve plant recovery.
- Operate oxygen plant under general supervision of the Senior Metallurgist.
- Perform supporting operational tasks (such as reporting, check list completion etc.) associated with oxygen plant operations, by following established processes.
- Monitor and record on daily basis the operating performance of the oxygen plant and make appropriate changes to ensure optimum tonnes, flow and purity of oxygen is achieved.
- Ensure various units of the oxygen plant are working within the right operating parameters.
- Regulate oxygen flow to obtain finer bubbles in the CIL tanks being fed with oxygen.
- Ensure oxygen purity of not less than 92% is achieved.
- Ensure booster pump is well secured and delivering the optimum pressures and flow.
- Complete operator log sheet and checklist in accordance to the allocated periods under review.
- Assist the Senior Metallurgist in troubleshooting variances in oxygen production deliveries.
- Ensure the compressor and air drying cooling systems are well cleaned.
- Perform weekly and monthly inspections on the various oxygen plant units or equipment, document and file them.
- Carry out task preparations and assist with basic maintenance, repairs and replacement of defective components, following detailed instructions.
- Prompt the Senior Metallurgist ahead of time on mandatory or regulatory third party inspections to be carried out in compliance with regulatory standards.
- Conduct oxygen lance servicing and / or changeouts around CIL tanks.
- Carry out inspections on all measuring devices of the oxygen plant and ensure defective ones are replaced.
- Assist the Senior Metallurgist in identifying components and parts of the oxygen plant for scheduled changeouts.
- Ensure adequate inventory of component spares are available for scheduled changeouts.
- Check for possible leakages from oxygen plant units and pipelines through to the delivery points on the CIL tanks and report for immediate fixing.
- Deliver own prescribed outcomes and/or provide support services, by applying Newmont's Health, Safety and Environment systems, policies and protocols.
- Maintain a high health, safety, and environmental awareness.
- Monitor own and peers' adherence to health and safety measures, protocols, production parameters and standards.
- Report any deviation from established health and safety measures and protocols to the Senior Metallurgist.
- Inspect the oxygen plant to check and identify any basic risks.
- Adhere strictly to Newmont's Health, Safety, and Environmental standards
- Act as a role model in complying with and supporting these standards and practices by:
- wearing mandatory protective clothing and appropriate PPE when and where required.
- reporting and correcting unsafe acts or conditions.
- proactively participating in safety meetings and promote safe working practices.
- strictly adhering to established SOP's, STP's, work policies and security procedures.
- actively partaking in hazard identification and correction.
- reporting environmental spills immediately and taking appropriate action to prevent contamination.
- attending all safety meetings.
- Position is located at the Akyem mine site.
- The physical demands and work environment characteristics described here are representatives of those that must be met by an employee to successfully perform essential functions of this job.
- Specific vision abilities required by the job include close vision, distance vision, colour vision, peripheral vision, and ability to adjust focus.
- Physical Demands: While performing the duties of the job, the employee is required to climb stairs, walk and stand.
- The employee is occasionally exposed to noise more than 85 decibels, and to fumes, high temperature, sharp edges, dust, pinch-points, vibration, slippery surfaces etc.
- Personal Protective Equipment (PPE): Work requires mandatory PPE such as helmet, goggles, high visible clothing, safety harness, ear plugs and dust mask according to working conditions.
- City and Guilds Certificate II & III in Metalliferous.
- Diploma/HND/Degree Certificate in mineral processing/Chemical/Materials Engineering or similar will have advantage.
- Knowledge in Pressure Swing Adsorption (PSA) and /or Liquid oxygen (LOX) plant operations.
- Working knowledge of industrial air compressors.
- Working knowledge of pressurised vessels.
- Minimum of 2 years' oxygen plant operating experience in a gold process plant or similar environment.
- Strong technical problem-solving skills.
- Strong decision-making ability.
- Strong operating and troubleshooting skills.
- Strong analysis and interpretation skills.
- Strong communication (written and verbal in English) and interpersonal skills.
- Ability to direct others to maintain the required output expected of an operating circuit.
- Ability to read, analyse and interpret common operational safety signage and directions.
- Ability to handle and coordinate multiple concurrent activities.
- Strong detail focus.
- Accuracy.
- Diligent.
- Directive and takes initiative.
- Efficient.
- Honesty and Integrity.
- Goal orientated.
- Self-motivated.
- High level of transparency.
- Reliable and independent.
- Ability to multitask.
- Professional.
JobDirecta